English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/117911
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Título

Nonburied Riprap Mattress Sizing for Single Piers in the Presence of Bedforms

AutorGalán, Álvaro ; Simarro, Gonzalo ; Sanchez-Serrano, Gema
Palabras claveSediment transport
Local scour countermeasures
Live-bed scour
Riprap sizing
Fecha de publicaciónjun-2015
EditorAmerican Society of Civil Engineers
CitaciónJournal of Hydraulic Engineering 141(6): 06015004 (2015)
ResumenThe present study focuses on riprap protection at single piers under live-bed conditions. The riprap mattress is displayed so that its top is leveled with the surrounding river bed, for ease in the construction process. Over 48 laboratory experiments have been carried out to understand the trend of the required riprap mattress width to protect single piers against edge and bedform undermining failures. The influence of bedform height on the required width is emphasized. A simple expression is given to calculate the required riprap mattress width; for low sediment transport rates the expressions given in the literature for clear-water conditions are recovered. © 2015 American Society of Civil Engineers
Versión del editorhttp://dx.doi.org/10.1061/(ASCE)HY.1943-7900.0001003
URIhttp://hdl.handle.net/10261/117911
DOI10.1061/(ASCE)HY.1943-7900.0001003
Identificadoresdoi: 10.1061/(ASCE)HY.1943-7900.0001003
issn: 0733-9429
e-issn: 1943-7900
Aparece en las colecciones: (ICM) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.