English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/117672
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Laser machining and functional applications of glass-ceramic materials

AutorSola, D.; Peña, J. I.
Fecha de publicación2013
EditorAmerican Ceramic Society
John Wiley & Sons
CitaciónInternational Journal of Applied Ceramic Technology 10(3): 484-491 (2013)
ResumenIn this work a study of glass-ceramic laser machining and some functional applications are presented. Firstly, both the effect produced by the machining method as well as how the modification of the reference position influence the machining results have been studied. Secondly, blind holes and special shape cross-section blind holes have been created for functional purposes. A Q-switched Nd:YAG laser at its fundamental wavelength of 1064 nm with pulse-widths in the nanosecond range has been used. Morphology, depth, and volume obtained by machining grooves have been studied. The variation in the ablation yield when the position of the surface to be machined is modified has also been studied. The composition and microstructure of the machined areas have been described and discussed and thermal tests have been performed to check if the objectives of the functional applications have been achieved. © 2012 American Ceramic Society.
Identificadoresdoi: 10.1111/j.1744-7402.2012.02752.x
issn: 1546-542X
e-issn: 1744-7402
Aparece en las colecciones: (ICMA) Artículos
(CFM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.