English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/115495
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Title

Artificial weathering of Spanish granites subjected to salt crystallization tests: Surface roughness quantification

AuthorsLópez-Arce, Paula ; Varas, María José ; Fernández-Revuelta, B.; Álvarez de Buergo, Mónica ; Fort González, Rafael ; Pérez-Soba, C.
KeywordsSalt crystallization tests
Granite
Durability
Natural stone
Surface roughness indexes
Weathering
Issue Date21-Sep-2010
PublisherElsevier
CitationCatena, 83: 170- 185 (2010)
AbstractFor hundreds of years, two types of granite (Zarzalejo and Alpedrete) from the Madrid region, Spain, have been extensively used as building stones. Fresh specimens of both stone types have been sampled from their respective quarries and subjected to sodium sulphate salt crystallization test (SCT). The resulting physical and chemical weathering patterns have been characterized by polarized light optical and environmental scanning electron microscopy. Water absorption under vacuum conditions and mercury intrusion porosimetry techniques were used to determine the pre- and post-SCT porosity and pore size distribution. The following non-destructive techniques were performed to assess stone durability and decay: ultrasound velocity (US) and surface roughness determination (SR) of intra- and inter-granular quartz, feldspar and biotite minerals at the centre as well as at the corners and edges of specimen surfaces. Before the SCT, US values were lower and SR values higher in Zarzalejo (ZAR) than Alpedrete (ALP) granite. After SCT, the US values declined while SR rose in both types of granites, with greater average differences in ZAR than ALP for both parameters. Feldspar and biotite and their inter-granular contacts were found to be the weakest and therefore the most decay-prone areas of the stone.The initial SR parameters were generally higher and rose more steeply after SCT at the corners and around the edges of the specimens.While behaviour was found to be similar in the two types of granite, variations were greater in ZAR, the less durable and more decay-prone of the two. Surface roughness measurement of mineral grains in granite stones is a very useful, in situ, non-destructive technique for quantifying salt crystallization-mediated physical and chemical weathering. The resulting quantification of decay and of related durability provides insight into the future behaviour of this type of stone, commonly used in historic buildings. © 2010 Elsevier B.V.
Publisher version (URL)http://dx.doi.org/10.1016/j.catena.2010.08.009
URIhttp://hdl.handle.net/10261/115495
DOI10.1016/j.catena.2010.08.009
Identifiersdoi: 10.1016/j.catena.2010.08.009
issn: 0341-8162
Appears in Collections:(IGE) Artículos
Files in This Item:
File Description SizeFormat 
C_2010_83_170.pdf757,42 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.