English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/114518
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Role of contact frequency on the wear rate of steel in discontinuous sliding contact conditions

AuthorsNavas, C.; García, Ignacio; Ye, X.; Damborenea, Juan de ; Celis, J. P.
KeywordsContact frequency
Wear rate prediction
Ball-on-disk
Friction
Issue Date2006
PublisherElsevier
CitationWear 260: 1096-1103 (2006)
AbstractThis work presents a novel approach of sliding ball-on-disk wear tests where the disc material is investigated. Each part of the wear track on the disc is in discontinuous contact with the counterbody. The contact frequency at each part of the wear track on the disc with the counterbody is defined by the rotation frequency of the disc. The sliding speed is however a function of both the rotation frequency and wear track diameter. In this work, the effect of the contact frequency on friction and wear was investigated on carbon steel in discontinuous sliding contact with corundum balls. Various sliding speeds were used while maintaining the contact frequency at a fixed value, and various contact frequencies were applied at constant sliding speeds. The wear rate of the disk material is shown to depend not only on the usual wear test parameters, namely sliding speed and contact load, but also on contact frequency. Moreover, contact frequency is shown to be a key factor determining the wear mode even at constant sliding speed and load. At contact frequencies above 9 Hz, the dominant wear mechanism is oxidational wear, while at frequencies below 4 Hz the dominant wear mechanism is adhesive wear. This transition from adhesive to oxidational wear takes place together with a change in the type of debris generated and in the value of the coefficient of friction. The validity of the Garcia-Ramil-Celis model proposed earlier for discontinous sliding contact conditions, is demonstrated for the case of carbon steel disks sliding against a chemically inert counterbody. © 2005 Elsevier B.V. All rights reserved.
URIhttp://hdl.handle.net/10261/114518
DOI10.1016/j.wear.2005.07.011
Identifiersdoi: 10.1016/j.wear.2005.07.011
issn: 0043-1648
Appears in Collections:(CENIM) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.