English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/114030
Compartir / Impacto:
Add this article to your Mendeley library MendeleyBASE
Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar otros formatos: Exportar EndNote (RIS)Exportar EndNote (RIS)Exportar EndNote (RIS)

Study of high strength steels for increased safety, environmental respect and cost rduction in the pipeline industry

Autor Gómez, Manuel; Vilanova, O.; Valles, P.; Medina, Sebastián F.
Palabras clave Environmental
Low-carbon steels
Fecha de publicación 24-oct-2013
EditorCSIC - Centro Nacional de Investigaciones Metalúrgicas (CENIM)
ResumenA series of anisothermal multipass hot torsion tests were carried out to simulate hot rolling on two low-carbon steels with different compositions and designed for pipeline construction. The evolution of austenite microstructure and precipitation state during rolling were characterized and the effects of cooling rate and austenite strengthening obtained at the end of thermomechanical processing on the final microstructure obtained after cooling were studied. Higher levels of austenite strengthening promote a refinement of final microstructure but can also restrict the fraction of low-temperature transformation products obtained at high cooling rates such as acicular ferrite. This works illustrates how the improvement of composition and thermomechanical processing of steel can contribute to achieve a safe and reliable access to energy, get environmental benefits and enhance economical savings during pipeline construction and life cycle.
URI http://hdl.handle.net/10261/114030
Aparece en las colecciones: (CENIM) Comunicaciones congresos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
high strength steels.pdf4,57 MBUnknownVisualizar/Abrir
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.