English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/103000
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Título

Characteristics of tyre dust in polluted air: Studies by single particle mass spectrometry (ATOFMS)

AutorDall'Osto, Manuel ; Beddows, D.C.S.; Gietl, Johanna K.; Olatunbosun, Oluremi A.; Yang, Xiaoguang; Harrison, Roy M.
Palabras claveNon-exhaust emissions
Road traffic
ATOFMS
Road surface wear
Tyre dust
Fecha de publicaciónsep-2014
EditorElsevier
CitaciónAtmospheric Environment 94: 224-230 (2014)
ResumenThere is a paucity of quantitative knowledge on the contributions of non-exhaust (abrasion and re-suspension) sources to traffic emissions. Abrasive emissions can be broadly categorised as tyre wear, brake wear and road dust/road surface wear. Current research often considers road dust and tyre dust as externally mixed particles, the former mainly composed of mineral matter and the latter solely composed of mainly organic matter and some trace elements. The aim of this work was to characterise tyre wear from both laboratory and field studies by using Aerosol Time-Of-Flight Mass Spectrometry (ATOFMS). Real-time single particle chemical composition was obtained from a set of rubber tyres rotating on a metal surface. Bimodal particle number size distributions peaking at 35nm and 85nm were obtained from SMPS/APS measurements over the range 6-20,000nm. ATOFMS mass spectra of tyre wear in the particle size range 200-3000nm diameter show peaks due to exo-sulphur compounds, nitrate, Zn and ions of high molecular weight (m/z>100) attributed to organic polymers. Two large ATOFMS datasets collected from a number of outdoor studies were examined. The former was constituted of 48 road dust samples collected on the roads of London. The latter consisted of ATOFMS ambient air field studies from Europe, overall composed of more than 2,000,000 single particle mass spectra. The majority (95%) of tyre wear particles present in the road dust samples and atmospheric samples are internally mixed with metals (Li, Na, Ca, Fe, Ti), as well as phosphate. It is concluded that the interaction of tyres with the road surface creates particles internally mixed from two sources: tyre rubber and road surface materials. Measurements of the tyre rubber component alone may underestimate the contribution of tyre wear to concentrations of airborne particulate matter. The results presented are especially relevant for urban aerosol source apportionment and PM2.5 exposure assessment. © 2014 Elsevier Ltd.
Descripción7 pages, 6 figures, 1 table
Versión del editorhttp://dx.doi.org/10.1016/j.atmosenv.2014.05.026
URIhttp://hdl.handle.net/10261/103000
DOI10.1016/j.atmosenv.2014.05.026
Identificadoresdoi: 10.1016/j.atmosenv.2014.05.026
issn: 1352-2310
e-issn: 1873-2844
Aparece en las colecciones: (ICM) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.