English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/10056
Compartir / Impacto:
Estadísticas
Add this article to your Mendeley library MendeleyBASE
Citado 10 veces en Web of Knowledge®  |  Ver citas en Google académico
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar otros formatos: Exportar EndNote (RIS)Exportar bibText (RIS)Exportar csv (RIS)
Título

Effect of the Air-Jet and the False-Twist Texturing Processes on the Stress-Relaxation of Polyamide 6.6 Yarns

AutorManich, Albert M.; Maíllo, Josefina; Cayuela Marín, Diana; Gacén Guillén, Joaquín; Castellar Bertrán, María Dolors; Ussman, M.
Palabras clavePolyamide 6.6
Texturing
Air-jet
False-twist
Filament fineness
Stress-relaxation
Modeling
Fecha de publicación8-may-2007
EditorJohn Wiley & Sons
CitaciónJournal of Applied Polymer Science 105(5): 2482-2487 (2007)
ResumenPolyamide 6.6 multifilament yarns were converted to crimped fibers by texturing to simulate the properties of natural staple fiber yarns for textile applications. Texturing is carried out by mechanical stresses (turbulences or twisting) under thermal or hydrothermal conditions which affect the fine structure of the fiber. Two polyamide yarns with the same linear density but composed of filaments of different fineness were textured by the False-Twist (thermal) and the Air-Jet (hydrothermal) procedures. The influence of texturing and filament fineness on the relaxation behavior of the yarns was studied.
Descripción6 pages, 3 figures.
Versión del editorhttp://dx.doi.org/10.1002/app.26438
URIhttp://hdl.handle.net/10261/10056
DOI10.1002/app.26438
ISSN0021-8995
Aparece en las colecciones: (IQAC) Artículos
Ficheros en este ítem:
No hay ficheros asociados a este ítem.
Mostrar el registro completo
 



NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.