2024-03-28T22:41:37Zhttp://digital.csic.es/dspace-oai/requestoai:digital.csic.es:10261/53062020-11-10T08:15:50Zcom_10261_123com_10261_8col_10261_376
Guillén, Jorge
Palanques, Albert
Puig, Pere
Durrieu de Madron, Xavier
Nyffeler, F.
2008-06-25T09:54:13Z
2008-06-25T09:54:13Z
2000-12
Scientia Marina 64(4): 427-435 (2000)
0214-8358
http://hdl.handle.net/10261/5306
10.3989/scimar.2000.64n4427
1886-8134
The water turbidity measured with optical methods (transmittance and backscattering) is usually expressed as beam attenuation coefficient (BAC) or formazin turbidity units (FTU). The transformation of these units to volumetric suspended sediment concentration (SSC) units is not straightforward, and accurate calibrations are required in order to obtain valuable information on suspended sediment distributions and fluxes. In this paper, data from field calibrations between BAC, FTU and SSC are presented and "best-fit" calibration curves are shown. These calibrations represent an "average" from different marine environments of the western Mediterranean (from estuary to continental slope). However, the general curves can only be applied for descriptive or semi-quantitative purposes. Comparison of turbidity measurements using the same sensor with different calibration ranges shows the advantage of simultaneously combining two instruments calibrated in different ranges when significant changes in suspended sediment concentrations are expected
eng
openAccess
Sediment concentration
Field calibrations
NW Mediterranean
Field calibration of optical sensors for measuring suspended sediment concentration in the western Mediterranean
artículo