2024-03-28T13:42:08Zhttp://digital.csic.es/dspace-oai/requestoai:digital.csic.es:10261/456482017-08-28T10:06:59Zcom_10261_66com_10261_3col_10261_319
Cores Sánchez, A.
Saiz de Ayala, J.
Mochón Muñoz, J.
Ruiz-Bustinza, I.
Parra, R.
2012-02-15T12:23:26Z
2012-02-15T12:23:26Z
2010
Revista de Metalurgia 46 (4) : 293-307 (2010)
0034-8570
http://hdl.handle.net/10261/45648
10.3989/revmetalm.0909
[ES]En planta piloto se fabrica una serie de sinterizados a partir de mezclas minerales como las utilizadas en el horno alto.
Se caracterizan los sinterizados mediante análisis químico y granulométrico y determinación de las temperaturas
de reblandecimiento y fusión. En el horno alto, mediante una serie de sondas, se determinan las temperaturas en el
horno, lo que permite situar la posición de la isoterma de mayor temperatura de 950 °C, que corresponde a la zona de
reserva térmica. Se ha desarrollado un modelo que propone una estimación indirecta de la forma de la zona cohesiva
a través de la determinación de la isoterma de mayor temperatura de la zona de reserva térmica. Los valores de
las temperaturas de reblandecimiento y fusión de los sinterizados permiten estimar las isotermas que limitan la zona
cohesiva, en el intervalo de 1.300-1.400 °C.
[EN] A series of sinters are manufactured in the pilot plant, using a mineral mixture, like that blast furnace. The sinters
are characterised, by chemical and granulometric analysis and by determining the softening and melting temperatures.
In the blast furnace temperatures are determined by using a series of probes in the furnace which make it possible
to locate the position of the isotherm of higher temperature of 950°C, which correspond to the reserve thermic zone.
A model has been developed, proposing and indirect estimation of the shape of the cohesive zone through the
determination of the isotherm with the highest temperature in the thermic reserve zone. The values of the softening
and melting temperatures of sinters can be used to estimate the isotherms limiting the cohesive zone in the 1300-
1400 °C range.
spa
openAccess
Horno alto
Zona de reserva
Sinterización
Red de sistema neuronal
Blast furnace
Cohesive zone
Thermal reserve zone
Sintering
Neuronal network system
Situación estimada de la zona cohesiva en el horno alto
artículo