English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/88287
logo share SHARE   Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:


Fabrication of an advanced hip prosthetic stem using β Ti-33.6Nb-4Sn alloy

AutorHanada, S.
Palabras claveβ Ti-33.6%Nb-4%Sn
Young’s modulus
Fecha de publicación7-dic-2013
ResumenThis study used severe cold rolling followed by cold swaging of β Ti-33.6%Nb-4%Sn rods to form a characteristic fiber structure composed of stress-induced α” martensite with <010> texture and a β phase with <101> texture, resulting in a material with a low Young’s modulus of 40 GPa. The high tensile strength of 1270 MPa and fatigue strength of 850 MPa were attained by heat treatment at 673 K for 5 h through fine α precipitation in the fiber structure. A new method of fabricating a high-performance hip prosthetic stem was investigated based on the low Young’s modulus and high strength obtained. After fabricating the stem by cold rolling, cold swaging, cold die-forging and machining, its neck region was given higher strength through local heat treatment, while the low Young’s modulus remained almost unchanged in a distal portion of the stem. When a stem tip in the distal part was heat treated at 423 K, reverse α”→β transformation occurred and the tangent modulus decreased to less than 30 GPa, accompanied by stress-induced β→α”. It was concluded that the method presented herein provided a low Young’s modulus of approximately 40 GPa in the distal part and high fatigue strength of approximately 850 MPa in the neck region of a high-performance hip prosthetic stem.
DescripciónCiclo de Conferencias del Centro Nacional de Investigaciones Metalúrgicas (CENIM)
Aparece en las colecciones: (CENIM) Cursos-Material didáctico
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Hanada13122013.pdf525,73 kBAdobe PDFVista previa
Mostrar el registro completo

NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.