English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/78421
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Title

Influence of deformation and molybdenum content on acicular ferrite formation in medium carbon steels

AuthorsCapdevila, Carlos; Ferrer, J. P.; García Mateo, Carlos; García Caballero, Francisca; López, Víctor; García de Andrés, Carlos
Issue Date2006
PublisherIron and Steel Institute of Japan
CitationISIJ International 46: 1093-1100 (2006)
AbstractThe present work deals with the influence of deformation and molybdenum content on the subsequent austenite-to-acicular ferrite transformation during continuous cooling in medium carbon microalloyed steels. The results obtained demonstrate that higher deformation temperature induces a finer austenite grain size as a result of austenite recrystallisation processes during cooling down to austenite decomposition temperature. The higher the molybdenum content and severity of deformation are, the finer austenite grain is. Likewise, it was concluded that molybdenum suppress pearlitic microstructure, and clearly delay proeutectoid ferrite field to longer times. By contrast, acicular ferrite transformation is enhanced in molybdenum rich steel, which not only affect the volume fraction but also the morphology of acicular ferrite. © 2006 ISIJ.
URIhttp://hdl.handle.net/10261/78421
DOI10.2355/isijinternational.46.1093
Identifiersdoi: 10.2355/isijinternational.46.1093
issn: 0915-1559
Appears in Collections:(CENIM) Artículos
Files in This Item:
File Description SizeFormat 
93_ISIJ_capdevila.pdf3,37 MBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.