|
| | Derechos | Preview | Fecha Public. | Título | Autor(es) | Tipo |
| 241 | closedAccess | | may-2006 | Delamination effect on the impact toughness of an ultrahigh carbon–mild steel laminate composite | Pozuelo, M.; Carreño, Fernando CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 242 | closedAccess | | 2008 | Bulk nanocrystalline ω-Zr by high-pressure torsion | Pérez Prado, María Teresa CSIC ORCID; Gimazov, A. A.; Ruano, Oscar Antonio CSIC ORCID; Kassner, M. E.; Zhilyaev, A. P. CSIC ORCID | artículo |
| 243 | closedAccess | | 2009 | Fracture toughness for interfacial delamination of Cr–Mo steel multilayer laminate | Pozuelo, M.; Cepeda-Jiménez, C.M. CSIC ORCID ; Chao, Jesús CSIC; Carreño, Fernando CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 244 | closedAccess | | 2003 | Superplastic Behavior of Hot Extruded Gamma TiAl (Mo, Si) Alloys | Jiménez, José Antonio CSIC ORCID ; Carsí, Manuel CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID; Frommeyer, G.; Knippscher, S.; Wittig, J. E. | artículo |
| 245 | openAccess |  | jul-2020 | Large elongations in WE54 magnesium alloy by solute-drag creep controlling the deformation behavior | Ruano, Oscar Antonio CSIC ORCID; Álvarez-Leal, M.; Orozco-Caballero, A. CSIC ORCID; Carreño, Fernando CSIC ORCID | artículo |
| 246 | openAccess |  | 2010 | La tensión umbral para la fluencia, en un material de base magnesio | Valle, Jorge del CSIC; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 247 | closedAccess | | 1998 | Diffusional Creep and Diffusion-Controlled Dislocation Creep and Their Relation to Denuded Zones in Mg-ZrH2 Materials | Ruano, Oscar Antonio CSIC ORCID; Sherby, O. D.; Wadsworth, J.; Wolfenstine, J. | artículo |
| 248 | openAccess |  | 2005 | Accumulative roll bonding of a Mg-based AZ61 alloy | Valle, Jorge del CSIC; Pérez Prado, María Teresa CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 249 | closedAccess | | 1989 | Superplastic behavior of iron carbide | Kim, W. J.; Wolfenstine, J.; Frommeyer, G.; Ruano, Oscar Antonio CSIC ORCID; Sherby, O. D. | artículo |
| 250 | closedAccess | | 1996 | Texture gradient evolution in Al-5%Ca-5%Zn sheet alloy after tensile deformation at high superplastic strain rate | Pérez Prado, María Teresa CSIC ORCID; Cristina, M. C.; Torralba, Marcelino; Ruano, Oscar Antonio CSIC ORCID; González-Doncel, Gaspar | artículo |
| 251 | closedAccess |  | 2020 | Hot forming behavior of a modified Ni-Cr superalloy | Carreño, Fernando CSIC ORCID ; Carsí, Manuel CSIC ORCID; Llaneza, Jaime; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 252 | closedAccess | | 1977 | On solid solution hardening in Hf-O and Hf-N alloys | Ruano, Oscar Antonio CSIC ORCID; Elssner, G. | artículo |
| 253 | closedAccess | | 2009 | Microstructure Evolution during Recrystallization of Newly Developed Low Ni High Mn-N Stainless Steels | Jiménez, José Antonio CSIC ORCID ; Peñalba, F.; Carsí, Manuel CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 254 | closedAccess | | 1975 | On solid solution hardening in the zirconium-oxygen system | Ruano, Oscar Antonio CSIC ORCID; Elssner, G. | artículo |
| 255 | closedAccess | | 1985 | Deformation mechanisms in an austenitic stainless steel (25Cr-20Ni) at elevated temperature | Ruano, Oscar Antonio CSIC ORCID; Wadsworth, J.; Sherby, O. D. | artículo |
| 256 | closedAccess | | 1998 | Integral method from initial values to obtain the best fit of the Garofalo's creep equation | Rieiro, Ignacio; Ruano, Oscar Antonio CSIC ORCID; Eddahbi, M.; Carsí, Manuel CSIC ORCID | artículo |
| 257 | closedAccess |  | 2018 | Ductility and Stability in Metallic Materials | Ruano, Oscar Antonio CSIC ORCID; Carreño, Fernando CSIC ORCID ; Carsí, Manuel CSIC ORCID | artículo |
| 258 | closedAccess | | 2003 | Grain Refinement in a Mg AZ91 Alloy via Large Strain Hot Rolling | Valle, Jorge del CSIC; Pérez Prado, María Teresa CSIC ORCID; Bartolomé, J. R.; Peñalba, F.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 259 | closedAccess |  | 2018 | Hot Forming Optimization of ZK30 Magnesium Alloy | Carsí, Manuel CSIC ORCID; Carreño, Fernando CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 260 | closedAccess | | 1997 | High strain rate torsional behavior of an ultrahigh carbon steel (1.8 Pct C-1.6 Pct Al) at elevated temperature | Carsí, Manuel CSIC ORCID; Peñalba, F.; Ruano, Oscar Antonio CSIC ORCID; Sherby, O. D. | artículo |
| 261 | closedAccess | | 2001 | Texture, Grain Boundaries and Deformation of Superplastic Aluminum Alloys | Pérez Prado, María Teresa CSIC ORCID; McNelley, T. R.; González-Doncel, Gaspar; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 262 | closedAccess | | 1989 | Strain hardening during superplastic deformation of A1-7475 alloy | Adabbo, H. E.; González-Doncel, Gaspar; Ruano, Oscar Antonio CSIC ORCID; Belzunce, J. M.; Sherby, O. D. | artículo |
| 263 | closedAccess | | 1999 | Texture Evolution of the Tetragonal Al3CaZn Phase in Al-5%Ca-5%Zn Superplastic Sheet Alloy after Annealing and Deformation | Pérez Prado, María Teresa CSIC ORCID; Ibáñez, Joaquín CSIC; Cristina, M. C.; Muñoz-Morris, M. Antonia CSIC ; Ruano, Oscar Antonio CSIC ORCID; González-Doncel, Gaspar | artículo |
| 264 | openAccess |  | 2007 | Influence of the thermomechanical processing on the superplastic forming of Mg-Al alloys | Pérez Prado, María Teresa CSIC ORCID; Valle, Jorge del CSIC; Salort, F.; Peñalba, F.; Gómez, X.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 265 | openAccess |  | 30-ago-2005 | Evolución de la textura durante la deformación de una aleación superplástica de Al-6 % Cu-0,4 % Zr | Eddahbi, M.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 266 | closedAccess | | 2003 | Texture evolution during graing rowth in annealed MGAZ61 alloy | Pérez Prado, María Teresa CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 267 | closedAccess | | 2008 | Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding | Jiang, L.; Pérez Prado, María Teresa CSIC ORCID; Gruber, P. A.; Arzt, E.; Ruano, Oscar Antonio CSIC ORCID; Kassner, M. E. | artículo |
| 268 | closedAccess |  | 1993 | High temperature deformation behavior of an AlFeVSi alloy | Carreño, Fernando CSIC ORCID ; González-Doncel, Gaspar; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 269 | closedAccess | | 2004 | Solute-diffusion- controlled dislocation creep in pure aluminium containing 0.026 at.% Fe | Sherby, O. D.; Goldberg, A.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 270 | closedAccess | | 1998 | Microtexture evolution during annealing and superplastic deformation of Al-5 pct Ca-5 pct Zn | Pérez Prado, María Teresa CSIC ORCID; McNelley, T. R.; Ruano, Oscar Antonio CSIC ORCID; González-Doncel, Gaspar | artículo |
| 271 | openAccess |  | oct-2011 | Influence of the supersaturated silicon solid solution concentration on the effectiveness of severe plastic deformation processing in Al–7 wt.% Si casting alloy | Cepeda-Jiménez, C.M. CSIC ORCID ; García-Infanta, J.M. CSIC; Zhilyaev, A. P. CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID; Carreño, Fernando CSIC ORCID | artículo |
| 272 | openAccess |  | 30-oct-2012 | Effect of warm accumulative roll bonding on the evolution of microstructure, texture and creep properties in the 7075 aluminium alloy | Hidalgo-Manrique, P.; Cepeda-Jiménez, C.M. CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID; Carreño, Fernando CSIC ORCID | artículo |
| 273 | closedAccess | | 2003 | Microstructure and fracture properties of an ultrahigh carbon steel–mild steel laminated composite | Carreño, Fernando CSIC ORCID ; Chao, Jesús CSIC; Pozuelo, M.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 274 | openAccess |  | mar-2004 | Effect of sheet thickness on the microstructural evolution of an Mg AZ61 alloy during large strain hot rolling | Pérez Prado, María Teresa CSIC ORCID; Valle, Jorge del CSIC; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 275 | openAccess |  | 2020 | Processing Maps for the Hot Forming of Polycrystalline Metallic Materials Using the Garofalo Equation | Rieiro, I.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 276 | closedAccess | | 2005 | Deformation mechanisms responsible for the high ductility in a Mg AZ31 alloy analyzed by electron backscattered diffraction | Valle, Jorge del CSIC; Pérez Prado, María Teresa CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 277 | closedAccess | | 1986 | Development of ferrous laminated composites with unique microstructures by control of carbon diffusion | Kum, D. W.; Oyama, T.; Ruano, Oscar Antonio CSIC ORCID; Sherby, O. D. | artículo |
| 278 | closedAccess |  | 2020 | Critical Analysis of Threshold Stresses in the Creep Mechanisms of a Powder Metallurgy Magnesium Alloy AZ31 | Valle, J. A. del; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 279 | openAccess |  | 1998 | Caracterización y propiedades mecánicas a alta temperatura de un acero inoxidable dúplex | Jiménez, José Antonio CSIC ORCID ; Carsí, Manuel CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 280 | closedAccess | | ago-2007 | Microstructural development during equal channel angular pressing of hypo-eutectic Al–Si casting alloy by different processing routes | García-Infanta, J.M. CSIC; Swaminathan, S.; Zhilyaev, A. P. CSIC ORCID; Carreño, Fernando CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID; McNelley, T. R. | artículo |
| 281 | closedAccess | | 2007 | Optimization of the microstructure for improving superplastic forming in magnesium alloys | Valle, Jorge del CSIC; Peñalba, F.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 282 | closedAccess |  | 2017 | Modelling the optimum hot workability of TiB reinforced Ti-6Al-4 V alloy by stability maps | García de Cortazar, M.; Peñalba, F.; Silveira, E.; Gómez-Mitxelena, Xabier; Carsí, Manuel CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 283 | closedAccess |  | 2013 | High temperature deformation and microstructural instability in AZ31 magnesium alloy | Spigarelli, S.; Ruano, Oscar Antonio CSIC ORCID; El Mehtedi, M.; Valle, Jorge del CSIC | artículo |
| 284 | closedAccess | | 2006 | Texture evolution during deformation of an Al-6%Cu-0.4%Zr superplastic alloy | Eddahbi, M.; Carsí, Manuel CSIC ORCID; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 285 | openAccess |  | mar-2004 | Comparación de la microestructura y propiedades de impacto de dos materiales compuestos laminados de acero de ultraalto contenido de carbono | Pozuelo, M.; Carreño, Fernando CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 286 | closedAccess |  | 2018 | Superplasticity in a commercially extruded ZK30 magnesium alloy | Álvarez-Leal, M.; Orozco-Caballero, A. CSIC ORCID; Carreño, Fernando CSIC ORCID ; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 287 | closedAccess | | 1995 | Mechanical properties of two ultrahigh carbon-boron tool steels | Jiménez, José Antonio CSIC ORCID ; Frommeyer, G.; Acosta, P.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 288 | closedAccess | | 1991 | Mechanical behavior and lattice reorientation during tensile deformation of Al-4%Cu-0.1%Fe single crystals | González-Doncel, Gaspar; Torralba, Marcelino; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 289 | closedAccess | | jul-2005 | Deformation behaviour of an Al-6%Cu-0.4%Zr superplastic alloy containing a gradient of texture | Eddahbi, M.; Ruano, Oscar Antonio CSIC ORCID | artículo |
| 290 | openAccess |  | ago-2009 | Impact toughness improvement of high strength aluminium alloy by intrinsic and extrinsic fracture mechanisms via hot roll bonding | Cepeda-Jiménez, C.M. CSIC ORCID ; García-Infanta, J.M. CSIC; Pozuelo, M.; Ruano, Oscar Antonio CSIC ORCID; Carreño, Fernando CSIC ORCID | artículo |
