Por favor, use este identificador para citar o enlazar a este item:
http://hdl.handle.net/10261/59530
COMPARTIR / EXPORTAR:
SHARE BASE | |
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE | |
Título: | Utilisation of different types of coal fly ash in the production of ceramic tiles |
Autor: | KocKal, N. U. | Palabras clave: | Sintering Microstructure |
Fecha de publicación: | 2012 | Editor: | Sociedad Española de Cerámica y Vidrio | Citación: | Boletín de la Sociedad Española de Cerámica y Vidrio Vol 51, 5, 297-304, Septiembre-Octubre 2012 | Resumen: | The influence of varying proportions of different types of fly ash (used in place of feldspar) and different sintering temperatures on the sintered properties of ceramic tile bodies was evaluated. The results indicated that sintering ceramic tiles with a high fly ash content at a high temperature caused a decrease in the properties because of bloating. The ceramic samples containing a higher amount of fly ash that were sintered at low temperature exhibited lower water absorption, larger shrinkage and strength because of the densification observed also in microstructural investigation. | Versión del editor: | http://boletines.secv.es/upload/2012102993749.201251297.pdf | URI: | http://hdl.handle.net/10261/59530 | ISSN: | 0366-3175 |
Aparece en las colecciones: | (ICV) Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
bsecv-06-11-2012-dos.pdf | 1,16 MB | Adobe PDF | Visualizar/Abrir |
CORE Recommender
Page view(s)
564
checked on 18-abr-2024
Download(s)
237
checked on 18-abr-2024
Google ScholarTM
Check
NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.