Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/57677
Título : Distinguishing nanowire and nanotube formation by the deposition current transients
Autor : Proenca, M. P., Sousa, C. T., Ventura, Jacint, Vázquez, M., Araújo, J. P.
Fecha de publicación : 31-May-2012
Editor: BioMed Central
Resumen: AbstractHigh aspect ratio Ni nanowires (NWs) and nanotubes (NTs) were electrodeposited inside ordered arrays of self-assembled pores (approximately 50 nm in diameter and approximately 50 μm in length) in anodic alumina templates by a potentiostatic method. The current transients monitored during each process allowed us to distinguish between NW and NT formation. The depositions were long enough for the deposited metal to reach the top of the template and form a continuous Ni film. The overfilling process was found to occur in two steps when depositing NWs and in a single step in the case of NTs. A comparative study of the morphological, structural, and magnetic properties of the Ni NWs and NTs was performed using scanning electron microscopy, X-ray diffraction, and vibrating sample magnetometry, respectively.
URI : http://hdl.handle.net/10261/57677
Identificadores: http://dx.doi.org/10.1186/1556-276X-7-280
Citación : Nanoscale Research Letters. 7(1):280 (2012)
Appears in Collections:(ICMM) Artículos

Files in This Item:
File Description SizeFormat 
1556-276X-7-280.xml53,95 kBXMLView/Open
1556-276X-7-280.pdf2,66 MBAdobe PDFView/Open
Show full item record
 
CSIC SFX LinksSFX Query

Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.