English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/56421
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
DC FieldValueLanguage
dc.contributor.authorGómez, Manuel-
dc.contributor.authorRancel, Lucía-
dc.contributor.authorMedina, Sebastián F.-
dc.date.accessioned2012-09-18T08:16:12Z-
dc.date.available2012-09-18T08:16:12Z-
dc.date.issued2009-
dc.identifier.citationMetals and Materials International 15(4) : 689-699 (2009)es_ES
dc.identifier.issn1598-9623-
dc.identifier.urihttp://hdl.handle.net/10261/56421-
dc.description.abstractDouble-deformation isothermal tests and multipass continuous-cooling hot torsion tests were used to study the evolution of austenite microstructures during isothermal and non-isothermal hot deformation of an Nb microalloyed steel. These tests, coupled with microstructural characterization, have verified that the no-recrystallization temperature (Tnr) corresponds roughly to the temperature where recrystallization starts to be incomplete during rolling. An accurate method to estimate the recrystallized fraction during hot rolling based on stress-strain data, and which does not require metallographic studies, is proposed. The results of this method have been successfully compared to metallographic measurements, the values of non-isothermal fractional softening and the accumulated stress measured in the plots of mean flow stress (MFS) versus the inverse of temperature. A remarkable austenite grain refinement occurs in the first hot rolling passes after reheating. The correlation of isothermal and continuous cooling tests is better understood if the effect of grain size on recrystallization and precipitation is taken into account.es_ES
dc.language.isoenges_ES
dc.publisherSpringeres_ES
dc.rightsopenAccesses_ES
dc.subjectMicroalloyed steelses_ES
dc.subjectHot rollinges_ES
dc.subjectStatic recrystallizationes_ES
dc.subjectAustenite grain sizees_ES
dc.subjectNon-isothermal softeninges_ES
dc.titleAssessment of austenite static recrystallization and grain size evolution during multipass hot rolling of a niobium-microalloyed steeles_ES
dc.typeArtículoes_ES
dc.identifier.doi10.1007/s12540-009-0689-0-
dc.description.peerreviewedPeer reviewedes_ES
dc.relation.publisherversionhttp://dx.doi.org/10.1007/s12540-009-0689-0es_ES
Appears in Collections:(CENIM) Artículos
Files in This Item:
File Description SizeFormat 
32_Met Mater Int 15 (2009) 689-699.pdf1,03 MBAdobe PDFThumbnail
View/Open
Show simple item record
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.