English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/55735
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Título

Study of the stability of the molten zone and the stresses induced during the growth of Al2O3–Y3Al5O12 eutectic composite by the laser floating zone technique

AutorSola, D.; Ester, Francisco Javier; Oliete, Patricia B.; Peña, J. I.
Palabras claveAl2O3
YAG
Thermal shock resistance
Defects
Eutectic
Fecha de publicaciónjun-2011
EditorElsevier
CitaciónJournal of the European Ceramic Society 31(7): 1211-1218 (2011)
ResumenA series of analytical calculations is used to study both the effect of the thermal gradients and the stability of the molten zone in the laser floating zone growth of Al2O3–Y3Al5O12 eutectic composite. The thermal gradients in the solidification interface have been calculated and the axial gradient compared with the experimental one of 4.5 × 105 K/m. For these calculations the coefficients of heat transfer from the molten zone to the ambient at the solid-melt interface have been previously obtained. The thermal stresses generated by the high thermal gradients can induce crack formation during the cooling depending on the rod diameter. The theory predicts that it is possible to grow rods free of cracks up to R = 1.7 mm, at low rates (10 mm/h) in close agreement with the experimental critical radius of 1.6 mm.The dependence of the zone length on the input laser power used to carry out the growth is shown. The study of the floating zone profile allows determining the maximum stable zone length, verifying the stability criterion established by some authors.
Descripción8 páginas, 7 figuras.
Versión del editorhttp://dx.doi.org/10.1016/j.jeurceramsoc.2010.08.022
URIhttp://hdl.handle.net/10261/55735
DOI10.1016/j.jeurceramsoc.2010.08.022
ISSN0955-2219
Aparece en las colecciones: (ICMA) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.