DSpace

Digital.CSIC > Ciencia y Tecnología de Materiales > Instituto de Ciencia de Materiales de Aragón (ICMA) > (ICMA) Artículos >

Share

EndNote

Impact

Open Access item Copolyimide mixed matrix membranes with oriented microporous titanosilicate JDF-L1sheet particles

Authors:Galve, Alejandro
Vispe, E.
Téllez, Carlos
Coronas, Joaquín
Issue Date:2011
Publisher:Elsevier
Citation:Journal of Membrane Science 370(1-2): 131-140 (2011)
Abstract:JDF-L1 is a microporous titanosilicate exhibiting a layer structure with pore size of about 3 Å. It is consequently an attractive material to separate H2-containing mixtures. This is the reason why JDF-L1, after disaggregation by means of hexadecyltrimethylammonium surfactant, has been combined with a carboxyl group containing copolyimide (6FDA-4MPD/6FDA-DABA 4:1) to produce mixed matrix membranes, which were applied to the separation of H2/CH4 and O2/N2 mixtures. Additionally, due to the sheet growth habit of JDF-L1 crystals, a preferential horizontal orientation of the JDF-L1 filler particles dispersed into the polymer was expected. This preferential orientation, which was achieved when the polymer solution concentration used during the membrane casting process was relatively low, has been studied by optical and electronic microscopy, X-ray diffraction and polarized Raman spectroscopy. A quantitative analysis was carried out applying Cussler's model for mixedmatrixmembranes with oriented flakes.
URI:http://hdl.handle.net/10261/52543
ISSN:0376-7388
Identifiers:doi: 10.1016/j.memsci.2011.01.011
Appears in Collections:(ICMA) Artículos

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.