Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/44801
COMPARTIR / EXPORTAR:
logo share SHARE logo core CORE BASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE

Invitar a revisión por pares abierta
Título

X-ray powder diffraction-based method for the determination of the glass content and mineralogy of coal (co)-combustion fly ashes

AutorFont, Oriol CSIC; Moreno, Natalia CSIC ORCID ; Izquierdo, M. CSIC ORCID; Querol, Xavier CSIC ORCID ; Álvarez, Esther; Díez, Sergi CSIC ORCID ; Elvira, Josep CSIC ORCID ; Antenucci, D.; Nugteren, H.; Plana Llevat, Feliciano CSIC; López, Ana; Coca, Pilar; Peña, Francisco G.
Palabras claveGlass
Mineralogy
Fly ash
XRD
Fecha de publicación2010
EditorElsevier
CitaciónFuel
ResumenThe relevance of Al–Si glass in a number of fly ash applications, such as use as a pozzolanic material, zeolite synthesis, and geopolymer production, necessitated research towards investigation of methods for an easy and consistent determination of the glass content in this coal (co)-combustion by-products. A glass standard-addition X-ray powder diffraction (XRD)-based method is proposed in this study as an alternative to the non straightforward procedure of conventional methods for determining the amorphous components, mainly by difference of the total mass and the addition of quantified crystalline species. A >99% Al–Si glass slag sample was selected as a standard for glass. A number of glass standard/fly ash mixtures were performed on Fluidized Bed Combustion (FBC) and pulverized coal combustion (PCC) fly ashes and subsequently analyzed by XRD. The method provides results closer to quantitative proportions of the Al–Si amorphous material of this (co)-combustion by-product, with a range of values <3% when compared with those obtained by the conventional Reference Intensity Method (RIM) method, demonstrating suitability and consistence of the procedure. Furthermore, by the proposed method, the requirement of previous determination of the mineral phases of conventional techniques is avoided. Coupled with the easy calculations, this allowed a fast determination of the glass content of (co)-combustion fly ash. The mineralogy of FBC and PCC fly ash was also investigated using the RIM method. The occurrence and proportions of the crystalline components in fly ash are in line with the combustion technology and their inherent operational parameters, especially the (co)-combustion temperature. The FBC fly ash shows the highest content of relic phases from feed coal (quartz, illite, calcite, and feldspars) and lower contents of amorphous components. The PCC fly ash are characterized by the highest proportions of mullite and Al–Si glass and low contents of quartz an other relict phases. The occurrence and distribution of anhydrite and Fe-oxide species appears to be related to the content of Ca and Fe in the feed fuels, showing slightly higher contents in FBC than in PCC fly ash.
Versión del editorhttp://dx.doi.org/10.1016/j.fuel.2009.11.024
URIhttp://hdl.handle.net/10261/44801
DOI10.1016/j.fuel.2009.11.024
ISSN0016-2361
Aparece en las colecciones: (IDAEA) Artículos

Mostrar el registro completo

CORE Recommender

SCOPUSTM   
Citations

64
checked on 14-mar-2024

WEB OF SCIENCETM
Citations

52
checked on 20-feb-2024

Page view(s)

405
checked on 18-mar-2024

Google ScholarTM

Check

Altmetric

Altmetric


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.