English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/39934
Share/Impact:
Statistics
logo share SHARE   Add this article to your Mendeley library MendeleyBASE
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:
Title

Shear resonance mode decoupling to determine the characteristic matrix of piezoceramics for 3-D modelling

AuthorsPardo, Lorena ; García, Álvaro ; Montero de Espinosa Freijo, Francisco; Brebøl, Klaus
KeywordsPiezocerámica
Piezoceramics
Caracterizatión
Characterization
Resonancia
Resonance
Cizalla
Shear
Modelización
Modeling
Titanatos
Titanates
Issue DateMar-2011
CitationIEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control
AbstractThe determination of the characteristic frequencies of an electromechanical resonance is not enough data to obtain material properties of piezoceramics, including all losses, from complex impedance measurements. Besides, values of impedance around resonance and antiresonance frequencies are also required to determine the material losses. Uncoupled resonances are needed for this purpose. The shear plates used for the material characterization present unavoidable mode coupling of the shear mode and other modes of the plate. A study of the evolution of the complex material coefficients as the coupling of modes evolves with the change in the aspect ratio (lateral dimension/thickness) of the plate is presented here. These are obtained by Alemany et al. software. A soft commercial PZT ceramic was used in this study and a number of shear plates amenable to material characterization were obtained in the range of aspect ratios below 15. The validity of the material properties for 3-D modelling of piezoceramics is assessed by means of Finite Element Analysis (FEA), which shows that uncoupled resonances are virtually pure thickness driven shear modes.
Publisher version (URL)http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5733267
URIhttp://hdl.handle.net/10261/39934
ISSN0885-3010
Appears in Collections:(ICMM) Artículos
Files in This Item:
File Description SizeFormat 
IEEEUFFC 58_3 pp 646-657 2011 Shear decoupling accepted version.pdf3,15 MBAdobe PDFThumbnail
View/Open
Show full item record
 


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.