Por favor, use este identificador para citar o enlazar a este item:
http://hdl.handle.net/10261/186764
COMPARTIR / EXPORTAR:
SHARE CORE BASE | |
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE | |
Título: | Ni/Fe electrodes prepared by electrodeposition method over different substrates for oxygen evolution reaction in alkaline medium |
Autor: | Pérez-Alonso, Francisco CSIC; Adán, Cristina CSIC; Rojas Muñoz, Sergio CSIC ORCID; Peña Jiménez, Miguel Antonio CSIC ORCID; García Fierro, José Luis CSIC ORCID | Palabras clave: | Electrolyzer prototype Type of substrate Ni/Fe electrodes Alkaline water electrolysis Durability test Electrodeposition method |
Fecha de publicación: | 26-mar-2014 | Editor: | Elsevier | Citación: | International Journal of Hydrogen Energy 39(10): 5204-5212 (2014) | Resumen: | A series of Ni/Fe electrodes have been prepared by electrodeposition of metal salt precursors on different substrates. The surface morphology, chemical composition and electrochemical characteristics of these electrodes were studied by various physico-chemical techniques such as X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). The electrochemical properties of the electrodes were examined by steady-state polarization curves. First, the influence of features such as Ni/Fe composition and type of substrate for the oxygen evolution reaction (OER) were determined by electrochemical techniques in a conventional 3-electrodes cell. The overpotential for the OER is lower for the electrodes with the higher concentrations of Ni. The electrodes with a Ni/Fe composition of 75/25 wt.% electrodeposited on steel mesh and/or 75/25 and 50/50 wt.% on nickel foam result in the most active configurations for the OER. These electrodes were further tested as anodes for alkaline water electrolysis during at least 70 h. In order to understand their activity and stability, the used electrodes were also characterized by SEM and compared to the fresh electrodes. Among the compositions and substrates examined, the Ni50Fe50-Nf electrode exhibited the lowest overpotential (2.1 V) for the OER and the higher stability as anode in an alkaline water electrolysis cell. | Versión del editor: | https://doi.org/10.1016/j.ijhydene.2013.12.186 | URI: | http://hdl.handle.net/10261/186764 | DOI: | 10.1016/j.ijhydene.2013.12.186 | ISSN: | 0360-3199 |
Aparece en las colecciones: | (ICP) Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
accesoRestringido.pdf | 15,38 kB | Adobe PDF | Visualizar/Abrir |
CORE Recommender
SCOPUSTM
Citations
91
checked on 11-abr-2024
WEB OF SCIENCETM
Citations
88
checked on 16-feb-2024
Page view(s)
222
checked on 18-abr-2024
Download(s)
27
checked on 18-abr-2024
Google ScholarTM
Check
Altmetric
Altmetric
NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.