English   español  
Please use this identifier to cite or link to this item: http://hdl.handle.net/10261/185188
Share/Impact:
Statistics
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Title

Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration

AuthorsCivantos, A.; Domínguez, C.; Pino, R. J.; Setti, G.; Pavón, J. J.; Martínez-Campos, Enrique; Garcia Garcia, F. J.; Rodríguez, J. A.; Allain, J. P.; Torres, Y.
KeywordsTrabecular bone
Etching
Osseointegration
Biomimetic scaffolds
Porous titanium
Surface modification
Issue Date2019
PublisherElsevier
CitationSurface and Coatings Technology 368: 162-174 (2019)
AbstractTitanium implant failures are mainly related to stress shielding phenomenon and the poor cell interaction with host bone tissue. The development of bioactive and biomimetic Ti scaffolds for bone regeneration remains a challenge which needs the design of Ti implants with enhanced osseointegration. In this context, 4 types of titanium samples were fabricated using conventional powder metallurgy, fully dense, dense etched, porous Ti, and porous etched Ti. Porous samples were manufactured by space holder technique, using ammonium bicarbonate particles as spacer in three different ranges of particle size (100–200 μm, 250–355 μm and 355–500 μm). Substrates were chemically etched by immersion in fluorhydric acid at different times (125 and 625 s) and subsequently, were characterized from a micro-structural, topographical and mechanical point of view. Etched surfaces showed an additional roughness preferentially located inside pores. In vitro tests showed that all substrates were biocompatible (80% of cell viability), confirming cell adhesion of premioblastic cells. Similarly, osteoblast showed similar cell proliferation rates at 4 days, however, higher cell metabolic activity was observed in fully dense and dense etched surfaces at 7 days. In contrast, a significant increase of alkaline phosphatase enzyme expression was observed in porous and porous etched samples compared to control surfaces (dense and dense etched), noticing the suitable surface modification parameters (porosity and roughness) to improve cell differentiation. Furthermore, the presence of pores and rough surfaces of porous Ti substrates remarkably decreased macrophage activation reducing the M1 phenotype polarization as well M1 cell marker expression. Thus, a successful surface modification of porous Ti scaffolds has been performed towards a reduction on stress shielding phenomenon and enhancement of bone osseointegration, achieving a biomechanical and biofunctional equilibrium.
Publisher version (URL)http://dx.doi.org/10.1016/j.surfcoat.2019.03.001
URIhttp://hdl.handle.net/10261/185188
Identifiersdoi: 10.1016/j.surfcoat.2019.03.001
issn: 0257-8972
e-issn: 1879-3347
Appears in Collections:(ICTP) Artículos
Files in This Item:
File Description SizeFormat 
accesoRestringido.pdf15,38 kBAdobe PDFThumbnail
View/Open
Show full item record
Review this work
 

Related articles:


WARNING: Items in Digital.CSIC are protected by copyright, with all rights reserved, unless otherwise indicated.