Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/161948

COMPARTIR / EXPORTAR:

SHARE BASE	Comparte tu historia de Acceso Abierto
Visualizar otros formatos: MARC \| Dublin Core \| RDF \| ORE \| MODS \| METS \| DIDL \| DATACITE
Refman EndNote Bibtex RefWorks Excel CSV PDF DataCite Send via email

Título:	Inkjet printed multi-deposited YBCO on CGO/LMO/MgO/Y2O3/Al2O3/Hastelloy tape for 2G Coated Conductors
Autor:	Vlad, Valentina Roxana CSIC ORCID; Obradors, Xavier CSIC ORCID; Puig Molina, Teresa CSIC ORCID ; Ricart, Susagna CSIC ORCID; Molodyk, Alexander
Palabras clave:	Coated conductors Inkjet printing Yttrium barium copper oxide Printing Substrates Scanning electron microscopy Superconducting magnets Buffer layers
Fecha de publicación:	21-feb-2018
Editor:	Institute of Electrical and Electronics Engineers
Citación:	IEEE Transactions on Applied Superconductivity: 10.1109/TASC.2018.2808403 (2018)
Resumen:	We present the preparation of a new architecture of coated conductor by Inkjet printing of low fluorine YBa2Cu3O7-x on top of SuperOx tape: CGO/LMO/IBAD-MgO/Y2O3/Al2O3/Hastelloy. A 5-layered multi-deposited, 475 nm thick YBCO film was structurally and magnetically characterized. A good texture was achieved using this combination of buffer layers, requiring only a 30 nm thin IBAD-MgO layer. The LF-YBCO CC reaches self-field critical current density values of JcGB~15.9 MA/cm2 (5 K), ~1.23 MA/cm2 (77 K) corresponding to an Ic(77K)=58.4 A/cm-width. Inkjet printing offers a flexible and cost effective method for YBCO deposition, allowing patterning of structures.
Descripción:	Vlad, Valentina Roxana et al.
Versión del editor:	http://dx.doi.org/10.1109/TASC.2018.2808403
URI:	http://hdl.handle.net/10261/161948
ISSN:	1051-8223
Aparece en las colecciones:	(ICMAB) Artículos