English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/143894
Compartir / Impacto:
Título : An automated design methodology of RF circuits by using Pareto-optimal fronts of EMsimulated inductors
Autor : González-Echevarría, R.; Roca, Elisenda ; Castro-López, R. ; Fernández, Francisco V. ; Sieiro, J.; López-Villegas, J. M.; Vidal, N.
Palabras clave : Design methodologies
Pareto front generation
Single-objective optimization
Multi-objective optimization
Radio frecuency circuits
Electromagnetic simulation
Fecha de publicación : 2017
Editor: Institute of Electrical and Electronics Engineers
Citación : IEEE Transactions on Computer Aided Design of Integrated Circuits and Systems, 36(1): 15-26 (2017)
Resumen: Abstract: A new design methodology for radiofrequency circuits is presented that includes electromagnetic (EM) simulation of the inductors into the optimization flow. This is achieved by previously generating the Pareto-optimal front (POF) of the inductors using EM simulation. Inductors are selected from the Pareto front and their S-parameter matrix is included in the circuit netlist that is simulated using an RF simulator. Generating the EM-simulated POF of inductors is computationally expensive, but once generated, it can be used for any circuit design. The methodology is illustrated both for a singleobjective and a multiobjective optimization of a low noise amplifier
Versión del editor: http://dx.doi.org/10.1109/TCAD.2016.2564362
URI : http://hdl.handle.net/10261/143894
DOI: 10.1109/TCAD.2016.2564362
Aparece en las colecciones: (IMS-CNM) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
REDUCED_SIZED.pdf4,09 MBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 



NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.