Por favor, use este identificador para citar o enlazar a este item:
http://hdl.handle.net/10261/123836
COMPARTIR / EXPORTAR:
SHARE CORE BASE | |
Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL | DATACITE | |
Título: | Microreactors technology for hydrogen purification: Effect of the catalytic layer thickness on CuOx/CeO2-coated microchannel reactors for the PROX reaction |
Autor: | Laguna, Óscar H. CSIC ORCID; González Castaño, M. CSIC ORCID; Centeno, Miguel Ángel CSIC ORCID; Odriozola, José Antonio CSIC ORCID | Palabras clave: | Microreactor Process intensification CO-PROX Catalytic layer thickness |
Fecha de publicación: | 2015 | Editor: | Elsevier | Citación: | Chemical Engineering Journal, 275: 45-52 (2015) | Resumen: | Two blocks of microreactors composed by 100 microchannels and coated, respectively, with 150 and 300 mg of a CuOx/CeO2 catalyst, were prepared and tested in the preferential oxidation of CO in presence of H2 (PROX). The deposition of different amount of catalyst resulted in different catalytic layer thicknesses thus modifying the catalytic performances of the microreactor. The evaluation of the main reaction variables (the space velocity, the O2-to-CO ratio and the presence of H2O and/or CO2 in the stream) was performed over both microreactors and compared to that of the parent powder catalyst. The least loaded microreactor, with a coating thickness around 10 μm, presented the highest CO conversion and selectivity levels at temperatures below 160 ºC. This result evidences i) the improvement of the catalytic performances got by the structuration of the powder catalyst and ii) the importance of the selection of the adequate thickness of the catalytic layer on the microreactor, which have not to exceed and optimal value. An adequate coating thickness allows minimizing the mass and heat transport limitations, thus resulting in the enhancement of the catalytic performance during the PROX reaction | Versión del editor: | http://dx.doi.org/10.1016/j.cej.2015.04.023 | URI: | http://hdl.handle.net/10261/123836 | DOI: | 10.1016/j.cej.2015.04.023 |
Aparece en las colecciones: | (ICMS) Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
12 OHL.pdf | 250,33 kB | Adobe PDF | Visualizar/Abrir |
CORE Recommender
SCOPUSTM
Citations
28
checked on 18-abr-2024
WEB OF SCIENCETM
Citations
25
checked on 24-feb-2024
Page view(s)
232
checked on 23-abr-2024
Download(s)
341
checked on 23-abr-2024
Google ScholarTM
Check
Altmetric
Altmetric
Este item está licenciado bajo una Licencia Creative Commons