English   español  
Por favor, use este identificador para citar o enlazar a este item: http://hdl.handle.net/10261/117868
COMPARTIR / IMPACTO:
Estadísticas
logo share SHARE logo core CORE   Add this article to your Mendeley library MendeleyBASE

Visualizar otros formatos: MARC | Dublin Core | RDF | ORE | MODS | METS | DIDL
Exportar a otros formatos:

Título

Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics

AutorPastor, José Y. ; Martín, Antonio ; Molina-Aldareguía, Jon M.; Llorca, Javier; Oliete, Patricia B.; Larrea, A. ; Peña, J. I.; Orera, V. M.; Arenal, Raul
Palabras claveDirectional-solidification
Eutectic oxides
Nanomaterials
Plasticity
Superplasticity
Fecha de publicación2013
EditorElsevier
CitaciónJournal of the European Ceramic Society 33(13-14): 2579-2586 (2013)
ResumenNanofibrillar Al2O3-Y3Al5O12-Zr O2 eutectic rods were manufactured by directional solidification from the melt at high growth rates in an inert atmosphere using the laser-heated floating zone method. Under conditions of cooperative growth, the ternary eutectic presented a homogeneous microstructure, formed by bundles of single-crystal c-oriented Al2O3 and Y3Al5O12 (YAG) whiskers of ≈100nm in width with smaller Y2O3-doped ZrO2 (YSZ) whiskers between them. Owing to the anisotropic fibrillar microstructure, Al2O3-YAG-YSZ ternary eutectics present high strength and toughness at ambient temperature while they exhibit superplastic behavior at 1600K and above. Careful examination of the deformed samples by transmission electron microscopy did not show any evidence of dislocation activity and superplastic deformation was attributed to mass-transport by diffusion within the nanometric domains. This combination of high strength and toughness at ambient temperature together with the ability to support large deformations without failure above 1600K is unique and shows a large potential to develop new structural materials for very high temperature structural applications. © 2013 Elsevier Ltd.
URIhttp://hdl.handle.net/10261/117868
DOI10.1016/j.jeurceramsoc.2013.03.033
Identificadoresdoi: 10.1016/j.jeurceramsoc.2013.03.033
issn: 0955-2219
e-issn: 1873-619X
Aparece en las colecciones: (ICMA) Artículos
Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
accesoRestringido.pdf15,38 kBAdobe PDFVista previa
Visualizar/Abrir
Mostrar el registro completo
 

Artículos relacionados:


NOTA: Los ítems de Digital.CSIC están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.