2024-03-28T18:00:01Zhttp://digital.csic.es/dspace-oai/requestoai:digital.csic.es:10261/72492016-02-16T03:47:44Zcom_10261_32com_10261_4col_10261_411
Cualificación in situ de dispositivos antirruido por el método Adrienne
Cobo, Pedro
Ranz Guerra, Carlos
Maximum Length Sequence (MLS) method
Adrienne method
Signal subtraction technique
Sample-reflected signal
Optimal separation
Loudspeaker-microphone setup
7 pp.-- PACS nr.: 43.50.Gf.-- Comunicación presentada en los siguientes congresos: XXX Jornadas Nacionales de Acústica – TecniAcústica 1999. Encuentro Ibérico de Acústica (Ávila, 20-22 Octubre 1999).
Publicado en número especial de la Revista de Acústica: Vol 30(1999).
[EN] The Adrienne method combines the MLS method with the signal subtraction technique. The MLS method affords the impulse response of the system. The subtraction technique allows to separate optimally the direct and sample-reflected
signals. Maximum separation between the sample-reflected and the nearest events in the reflection trace is required in order the lowest reliable frequency to be minimum. Therefore, the microphone should be as close as possible to the sample whilst the loudspeaker should be as far as possible to the sample. As a consequence, the direct and sample-reflected events in the trace are close each other.
This work deals with the optimization of the loudspeaker-microphone setup, given the sample height, in order to get the best lowest reliable frequency.
[ES] El método Adrienne combina el método MLS con la técnica de la substracción de señal para el cálculo in situ de la RL de una barrera antirruido. Las señales directa y reflejada en la muestra se extraen de las trazas directa y reflejada, respectivamente, por ventaneo. La frecuencia más baja fiable del método depende de la duración de la ventana. Para que esta frecuencia sea mínima, la separación entre los eventos reflejado en la muestra y difractado en el altavoz o reflejado en el suelo ha de ser máxima. Dada la semi-altura de la barrera y la separación micrófono-muestra, este trabajo presenta la separación altavoz-micrófono óptima para mínima frecuencia más baja fiable.
2008-09-17T15:22:18Z
2008-09-17T15:22:18Z
1999-10
comunicación de congreso
XXX Jornadas Nacionales de Acústica – TecniAcústica 1999. Acústica Física y Procesado de Señales ; AFS12
84-8785-02-5
http://hdl.handle.net/10261/7249
spa
openAccess
Sociedad Española de Acústica