Mostrando resultados 1 a 20 de 71
Siguiente >
Derechos | Preview | Fecha Public. | Título | Autor(es) | Tipo |
closedAccess | | ene-2018 | A new combustion route for synthesis of TaB2 nanoparticles | Jalaly, Maisam; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2017 | A new family of cermets: Chemically complex but microstructurally simple | Obra, A.G. de la; Avilés Escaño, Miguel Ángel CSIC ORCID; Torres, Yadir; Chicardi, E. CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2-feb-2021 | A Novel, Simple and Highly Efficient Route to Obtain PrBaMn2O5+δ Double Perovskite: Mechanochemical Synthesis | Garcia-Garcia, Francisco J; Sayagués, María J; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2017 | A novel, simple and rapid route to the synthesis of boron cabonitride nanosheets: Combustive gaseous unfolding | Jalaly, M.; Gotor, F.J. CSIC ORCID ; Sayagués, María Jesús CSIC ORCID | artículo |
openAccess | | 2012 | Absence of the core–rim microstructure in TixTa1 − xCyN1 − y-based cermets developed from a pre-sintered carbonitride master alloy | Chicardi, E. CSIC ORCID; Córdoba, J.M. CSIC ORCID ; Sayagués, María Jesús CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2014 | An investigation on the formation mechanism of nano ZrB2 powder by a magnesiothermic reaction | Jalaly, M.; Bafghi, M.Sh.; Tamizifar, M.; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2012 | Bulk TiC xN 1-x-15%Co cermets obtained by direct spark plasma sintering of mechanochemical synthesized powders | Borrell, Amparo; Salvador, M. D.; Rocha, Victoria G. CSIC ORCID ; Fernández, Adolfo CSIC ORCID; Avilés Escaño, Miguel Ángel CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2014 | Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis | Moriche, R. CSIC ORCID; Marrero-López, David; Gotor, F.J. CSIC ORCID | artículo |
closedAccess | | ene-2018 | Core-rim structure formation in TiC-Ni based cermets fabricated by a combined thermal explosion/hot-pressing process | Lemboub, S.; Boudebane, S.; Gotor, F.J. CSIC ORCID ; Haouli, S.; Mezrag, S.; Bouhedja, S.; Hesser, G.; Chadli, H.; Chouchane, T. | artículo |
openAccess | | 2011 | Creep behavior of TiCxN1-x-CoTi cermets synthesized by mechanically induced self-sustaining reaction | Morales-Rodríguez, A.; Gallardo-López, Ángela; Domínguez Rodríguez, Arturo; Córdoba, J.M. CSIC ORCID ; Avilés Escaño, Miguel Ángel CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2020 | Development by Mechanochemistry of La0.8Sr0.2Ga0.8Mg0.2O2.8 Electrolyte for SOFCs | García-García, Francisco J. CSIC ORCID; Tang, Yunqing; Gotor, F.J. CSIC ORCID ; Sayagués, María Jesús CSIC ORCID | artículo |
openAccess | | 2012 | Development of multicomponent-multiphase materials based on (Ti,Ta,Nb)C xN 1-x carbonitride solid solutions | Córdoba, J.M. CSIC ORCID ; Chicardi, E. CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2020 | Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase | Obra, A.G. de la; Sayagués, María Jesús CSIC ORCID; Chicardi, E. CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2019 | Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates | Beltrán, Ana María; Martín-Santana, Y.; González, Jesús E.; Montealegre-Meléndez, Isabel; González, Eduardo CSIC; Peón-Avés, E.; Gotor, F.J. CSIC ORCID ; Torres, Yadir | artículo |
openAccess | | 2013 | Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N)-based cermets | Chicardi, E. CSIC ORCID; Torres, Yadir; Córdoba, J.M. CSIC ORCID ; Sayagués, María Jesús CSIC ORCID; Rodríguez, J. A.; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2014 | Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1-x)(C0.5N0.5) solid solutions | Chicardi, E. CSIC ORCID; Torres, Yadir; Córdoba, J.M. CSIC ORCID ; Hvizdoš, P.; Gotor, F.J. CSIC ORCID | artículo |
openAccess | | 2017 | Effect of the impact energy on the chemical homogeneity of a (Ti,Ta,Nb)(C,N) solid solution obtained via a mechanically induced self-sustaining reaction | Obra, A.G. de la; Gotor, F.J. CSIC ORCID ; Chicardi, E. CSIC ORCID | artículo |
openAccess | | 25-dic-2021 | Effect of the Processing Parameters on the Porosity and Mechanical Behavior of Titanium Samples with Bimodal Microstructure Produced via Hot Pressing | Chávez-Vásconez, Ricardo; Lascano, Sheila; Sauceda, Sergio; Reyes-Valenzuela, Mauricio; Salvo, Christopher; Mangalaraja, Ramalinga Viswanathan; Gotor, F.J. CSIC ORCID ; Arévalo, Cristina; Torres, Yadir | artículo |
closedAccess | | may-2018 | Effects of additives on the synthesis of TiCxN1−x by a solid-gas mechanically induced self-sustaining reaction | Chicardi, E. CSIC ORCID; Gotor, F.J. CSIC ORCID ; Alcalá, M.D. CSIC; Córdoba, J.M. CSIC ORCID | artículo |
openAccess | | 2019 | Effects of boron addition on the microstructure and mechanical properties of (Ti,Ta)(C,N)-Co based cermets | Chicardi, E. CSIC ORCID; Gotor, F.J. CSIC ORCID | artículo |